The guide rail lifting platform not only has strong load-bearing capacity and stable operation, but also is very convenient to operate. It is widely used in the factory production process. Below, the editor will introduce the functions and characteristics of the guide rail lifting platform.
??????
Rail type lifting platform
Function introduction of mechanical guide rail lifting platform:
Carrying 30 tons, achieving multi-point control, interactive interlocking between upper and lower floors, achieving safe use; Multi point control and interactive interlocking between upper and lower floors to achieve safe use; High lifting height, using side mounted oil cylinders or dual measuring oil cylinders, smooth operation, no noise, easy maintenance, and long service life; Power outage manual descent and emergency stop button, convenient, fast, and practical; The depth of the pit is generally 15cm30cm, and the height of the top layer is not limited. It can be customized according to the on-site environment; The floor door can be connected, and the inside and outside of the factory can be poked open to each other, which is convenient and saves space; Specially suitable for a 23 story steel structure factory building, both inside and outside can be used; The pump station adopts imported pump stations. If the speed requirement is too high, imported customized pump stations are used to achieve ideal delivery requirements. The oil cylinder and sealing components are made of imported parts to solve the problem of unstable oil pressure and component oil leakage for customers. Electrical components are optional,
Characteristics of mechanical guide rail lifting platform:
In addition to the safety devices of traditional traction elevators, hydraulic elevators are also equipped with overflow valves to prevent excessive system pressure during upward movement, emergency manual valves to allow the car to descend to a nearby floor position and open the door in case of power failure, and manual pumps to operate high-pressure oil to lift the car to a nearby floor position in case of system failure; Pipeline rupture valve: When the hydraulic system pipeline ruptures and the elevator car stalls and descends, it can automatically cut off (cut open; cut off) the oil circuit to stop descending. Oil temperature protection of fuel tank: When the oil temperature in the fuel tank exceeds the standard set value, the oil temperature protection device sends a signal to suspend the use of the elevator. The elevator can only be started when the oil temperature drops.
Low cost
Low failure rate: Due to the use of advanced hydraulic systems and good control methods, the elevator operation failure rate can be reduced. Low power consumption: When the hydraulic elevator descends, it is driven by the pressure generated by its own weight, which greatly saves energy.
Advantages of Civil Engineering
1. There is no need for a machine room above the shaft, and it can be installed at a height of 3.5 meters or more on the top floor.
2. The computer room can be located within a radius of 15 meters (f à n w é i) of the shaft, occupying an area of only 34 square meters.
3. Hydraulic elevators do not have counterweight devices to improve the utilization rate of shaft area.
4. The load and load-bearing capacity of hydraulic elevators are directly applied to excavations through oil cylinders, and the strength requirements for shafts are low. Brick or brick concrete structures are sufficient for shafts.
?????
Rail type lifting platform
Security and stability advantages
1. Overflow valve: can prevent excessive system pressure during upward movement
2. Emergency manual valve: In the event of a power failure, it can cause the elevator car to descend to a nearby floor position and open the door,
3. Manual pump: When the system malfunctions, the manual pump can be operated to pump high-pressure oil to lift the elevator car to a nearby floor position;
5. Oil temperature protection of fuel tank: When the oil temperature in the fuel tank exceeds the standard set value, the oil temperature protection device sends a signal to suspend the use of the elevator. The elevator can only be started when the oil temperature drops.
Operating cost advantage
1. Low failure rate: Due to the use of advanced hydraulic systems and good control methods, the elevator operation failure rate can be reduced.
2. Low power consumption: When a hydraulic elevator descends, it is driven by the pressure generated by its own weight, which greatly saves energy.
The above article introduces the functions and characteristics of the guide rail lifting platform. For this type of equipment with high safety performance, low operating costs, and high work efficiency, it has always been favored by many large factories.
?????
{23}
